Drone Manufacturers Must Regulate Themselves

0 613

Shumaker, Loop & Kendrick published an article on jdsupra.com discussing how the FAA is forcing drone manufactures to self-regulate.

In October of 2018, the Federal Aviation Authority Reauthorization 2018 Act was signed into law.  The new law comes with a set of regulations which for the first time extend the FAA’s authority over the manufacturers of drones.  For convenience’s sake, in this article I will use the term “drone” to describe what the FAA calls a small unmanned aircraft system (sUAS).  Before the 2018 Act was signed into law, the only regulations concerning drones were limited to the pilots and their operations of drones.  Now, manufacturers are tasked with knowing and understanding the FAA Rules to lawfully make and sell drones in the United States.

Manufacturers might wonder why they are suddenly the target of FAA authority.  Recently, the FAA Modernization and Reform Act of 2012 formally integrated drones and other small unmanned aircraft systems into the national airspace system.  Drone pilots who wanted to use a drone for commercial purpose were required to learn the regulation and pass a certification exam to earn a drone pilot license.  As a licensed pilot, I can confirm that the test is thorough and imparts a meaningful understanding of the safe operation of an aircraft within the national airspace system.  However, under those 2012 changes, drone pilots whether professional or hobbyist still bore sole responsibility for safe operation of their aircraft.

Airbus Monitors and Separates Drone Traffic

Since 2012, drones have quickly become a serious threat to the safe operation of the national airspace system.  First, drones have become so simple to use that anyone could buy a drone off the shelf of nearly any major electronics store and fly it within a few minutes and without any training.  Second, drones have become so advanced and so powerful that they are capable of flying greater distances from the operator while maintaining complete control.  Further, the development and improvements of wireless camera technology — which lets the drone pilot see a real-time feed through a camera mounted on the drone — is a likely culprit for why drones have seen such a recent surge in hobbyist and use.  A hobbyist can legally buy and fly a drone without any clue about the complex rules that govern the airspace system, which has created an unjustifiable risk of misuse, accidents, and possibly even death.

The FAA’s rule is intended to impose safety standards on manufacturers.  The formal mission of the FAA is to provide the safest, most efficient airspace system in the world.  Prior regulations were considered insufficient to preserve the safe operation of the national airspace system in light of advances in drone technology.  Because of these advances, the FAA is no longer comfortable leaving the responsibility of safe operation solely within the hands of drone pilots. While drone pilots will also fall under increased scrutiny in the 2018 Act, drone manufacturers are now responsible for implementing safety standards that will force compliance by drone pilots.

Section 345

The obligations on drone manufacturers are set forth in Section 345 of the 2018 Act, and compliance is mandatory.  The FAA Administrator will set a process for authorizing manufacturers to self-certify that the drones they produce comply with the relevant safety standards.  To introduce a drone into interstate commerce, the drone must be either self-certified by the manufacturer or approved by the FAA Administrator.

Drone Safety 101 From Buzzy The Drone

The self-certification process for a drone requires the manufacturer to issue a statement of compliance to the FAA Administrator which must:

  1. identify the aircraft make, model, range of serial numbers, and any applicable consensus safety standards used and accepted by the FAA Administrator;
  2. state that the aircraft make and model meets the provisions of the consensus safety standards;
  3. state that the aircraft make and model conforms to the manufacturer’s design data and is manufactured in a way that ensures consistency across units in the production process in order to meet the applicable consensus safety standards accepted by the Administrator; Continue reading about drone manufacturers must self-regulate.

Source: jdsupra.com


قالب وردپرس

You might also like More from author

Leave A Reply

Your email address will not be published.